Chapter 40 Diagnostic
VMG8924-B10D/B30D User’s Guide
287
40.3 Ping & TraceRoute & NsLookup
Use this screen to ping, traceroute, or nslookup an IP address. Click Maintenance > Diagnostic >
Ping&TraceRoute&NsLookup to open the screen shown next.
Figure 176 Maintenance > Diagnostic > Ping&TraceRoute&NsLookup
The following table describes the fields in this screen.
40.4 802.1ag
Click Maintenance > Diagnostic > 802.1ag to open the following screen. Use this screen to perform CFM
actions.
Table 141 Maintenance > Diagnostic > Ping & TraceRoute & NsLookup
LABEL DESCRIPTION
URL or IP
Address
Type the IP address of a computer that you want to perform ping, traceroute, or nslookup in
order to test a connection.
Ping Click this to ping the IPv4 address that you entered.
Ping 6 Click this to ping the IPv6 address that you entered.
Trace Route Click this to display the route path and transmission delays between the VMG to the IPv4
address that you entered.
Trace Route 6 Click this to display the route path and transmission delays between the VMG to the IPv6
address that you entered.
Nslookup Click this button to perform a DNS lookup on the IP address of a computer you enter.
To Next Page
Loading...
