ZyXEL Communications VMG8924-B10D - The Add New Share Screen

Chapter 16 USB Service
VMG8924-B10D/B30D User’s Guide
193
16.2.1 The Add New Share Screen
Use this screen to set up a new share or edit an existing share on the VMG. Click Add new share in the
File Sharing screen or click the Edit icon next to an existing share.
Please note that you need to set up your shares in the USB before enabling file sharing in the VMG. Also,
the following special characters are not allowed for the USB share name: ", ', `, <, >, ^, $, |, &, ;, \, /, :, *,
and ?.
Figure 102 Network Setting > USB Service > File Sharing > Add New Sharer
The following table describes the labels in this menu.
Add New User Click this button to create a user account to access the secured shares.
Status
This field shows the status of the user.
: The user account is not activated for the share.
: The user account is activated for the share.
User Name
This is the name of a user who is allowed to access the secured shares on the USB device.
Apply Click this to save your changes to the VMG.
Cancel Click this to restore your previously saved settings.
Table 77 Network Setting > USB Service > File Sharing
LABEL DESCRIPTION
Table 78 Network Setting > USB Service > Media Server
LABEL DESCRIPTION
Volume Select the volume in the USB storage device that you want to add as a share in the VMG.
This field is read-only when you are editing the share.
Share Path Manually enter the file path for the share, or click the Browse button and select the folder that
you want to add as a share.
This field is read-only when you are editing the share.
Description You can either enter a short description of the share, or leave this field blank.
Access Level Select Public if you want the share to be accessed by users connecting to the VMG. Otherwise,
select Security.
Apply Click Apply to save your changes.
Cancel Click Back to return to the previous screen.