Chapter 41 Troubleshooting
VMG8924-B10D/B30D User’s Guide
296
• Reduce the number of wireless clients connecting to the same AP simultaneously, or add additional
APs if necessary.
• Try closing some programs that use the Internet, especially peer-to-peer applications. If the wireless
client is sending or receiving a lot of information, it may have too many programs open that use the
Internet.
What is a Server Set ID (SSID)?
An SSID is a name that uniquely identifies a wireless network. The AP and all the clients within a wireless
network must use the same SSID.
41.5 USB Device Connection
The VMG fails to detect my USB device.
1 Disconnect the USB device.
2 Reboot the VMG.
3 If you are connecting a USB hard drive that comes with an external power supply, make sure it is
connected to an appropriate power source that is on.
4 Re-connect your USB device to the VMG.
41.6 UPnP
When using UPnP and the VMG reboots, my computer cannot detect UPnP and refresh My
Network Places > Local Network.
1 Disconnect the Ethernet cable from the VMG’s LAN port or from your computer.
2 Re-connect the Ethernet cable.
The Local Area Connection icon for UPnP disappears in the screen.
Restart your computer.
To Next Page
Loading...
