Chapter 19 Parental Control
VMG8924-B10D/B30D User’s Guide
207
Figure 115 Parental Control Rule: Add/Edit Rule > Add Service
The following table describes the fields in this screen.
Click Security > Parental Control > Add New PCP > Add to open the following screen.
Figure 116 Parental Control Rule: Add/Edit Rule > Add Keyword
The following table describes the fields in this screen.
Table 89 Parental Control Rule: Add/Edit > Add New Service
LABEL DESCRIPTION
Service Name Select the name of the service. Otherwise, select User Define and manualy specify the protocol
and the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Protocol Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP & UDP.
Port Enter the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 90 Parental Control Rule: Add/Edit > Add Keyword
LABEL DESCRIPTION
Site/URL
Keyword
Enter a keyword and click OK to have the VMG block access to the website URLs that contain
the keyword.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
