ABB ACQ810 - Page 244

244 Parameters
Copy of mstr The drive follows the same start/stop commands and
reference (received from the PI controller) as the master.
With this setting, the drive does not become master when
started.
In the example shown, drive 1 is master; drives 2 and 3 have
parameter 75.03 Follower mode set to Copy of mstr.
1
No. Name/Value Description FbEq
D
r
i
v
e
1
/
2
/
3
Frequency
Flow demand
Drive status
Master
Drive 1
Follower
Drive 2
Follower
Drive 3