ABB ACQ810 - Page 266

266 Parameters
79.08 Start 3 level Defines the start level for pump 3. This is also the stop level
for the pump unless Common stop is selected at parameter
79.02 Stopping mode. See the diagrams at parameter 79.01
Level mode.
0.00 … 32768.00% Start level for pump 3. TBA
79.09 Start 4 level Defines the start level for pump 4. This is also the stop level
for the pump unless Common stop is selected at parameter
79.02 Stopping mode. See the diagrams at parameter 79.01
Level mode.
0.00 … 32768.00% Start level for pump 4. TBA
79.10 Start 5 level Defines the start level for pump 5. This is also the stop level
for the pump unless Common stop is selected at parameter
79.02 Stopping mode. See the diagrams at parameter 79.01
Level mode.
0.00 … 32768.00% Start level for pump 5. TBA
79.11 Start 6 level Defines the start level for pump 6. This is also the stop level
for the pump unless Common stop is selected at parameter
79.02 Stopping mode. See the diagrams at parameter 79.01
Level mode.
0.00 … 32768.00% Start level for pump 6. TBA
79.12 Start 7 level Defines the start level for pump 7. This is also the stop level
for the pump unless Common stop is selected at parameter
79.02 Stopping mode. See the diagrams at parameter 79.01
Level mode.
0.00 … 32768.00% Start level for pump 7. TBA
79.13 Start 8 level Defines the start level for pump 8. This is also the stop level
for the pump unless Common stop is selected at parameter
79.02 Stopping mode. See the diagrams at parameter 79.01
Level mode.
0.00 … 32768.00% Start level for pump 8. TBA
79.14 High level In emptying mode, when the measured level exceeds this
value, all pumps start running at the speed defined by
parameter 79.19 High speed.
In filling mode, when the measured level exceeds this value,
all pumps stop (if not stopped already).
0.00 … 32768.00% High level. TBA
79.15 High switch Selects a digital source that is used to determine that the
liquid level in the container has risen very high. When the
source switches on, an alarm, LC TANK FULL is given. The
alarm is cleared when the source switches off.
Not used No high switch used. 0
DI1 Digital input DI1 (as indicated by 02.01 DI status, bit 0). 1073742337
DI2 Digital input DI2 (as indicated by 02.01
DI status, bit 1). 1073807873
DI3 Digital input DI3 (as indicated by 02.01 DI status, bit 2). 1073873409
DI4 Digital input DI4 (as indicated by 02.01 DI status, bit 3). 1073938945
DI5 Digital input DI5 (as indicated by 02.01 DI status, bit 4). 1074004481
Const Bit pointer setting (see Terms and abbreviations on page
109).
-
Pointer
No. Name/Value Description FbEq