3-8 (26) 2UEA001270 Rev. F ACS2000 User manual
Chapter 3 - Control system
Figure 3-7 Local operator panel
3.2.2.1 Features and functions of the CDP control panel
Features The key features of the CDP control panel include:
• 4-line display
• User selectable display of actual values, e.g. motor speed, current,
voltage, torque, power
• Fault memory to support maintenance
Functions The CDP control panel allows the operator to:
• enter start-up data into the drive,
• control the drive by setting reference values and by giving start, stop
and direction commands,
• display three actual values at a time,
• display and set parameters,
• display information on the last 64 fault events.
See Chapter 8 - Local operation and Chapter 9 - CDP control panel for
further information.
Legend
1 CDP control panel
2 SUPPLY OFF/DISCHARGING
3 SUPPLY ON/CHARGING
4 FAULT/ALARM
5 GROUND SW RELEASED
6 Emergency OFF pushbutton
1
2
3
4
5
6
To Next Page
Loading...
