Kit code key
The kit codes shown in this chapter break down as follows.
The format of the kit code is x-w-s-yyy(-VX), for example, L-6-8-401 where:
• x = cooling method
• A = air-cooled (some of these kits are also used with liquid-cooled drives)
• L = liquid-cooled
• w = cabinet width
• 4 = 400 mm
• 6 = 600 mm
• 8 = 800 mm
• s = module frame size / sizes
• 1 = R1i
• 2 = R2i
• 3 = R3i
• 4 = R4i
• 5 = R5i
• 6 = R6i/D6D
• 7 = R7i/D7D/D7T
• 8 = R8i/D8D/D8T
• X = any, or not defined.
• yyy = consecutive numbering
• 001…099 = Kits related to cabinets, for example, adapter plates
Common AC- and DC-related kits001…019
Cabinet mechanics kits020…049
Swing frame kits050…059
• 100…199 = Kits related to AC connection, for example, busbars
Kits with connection to AC100…129
Kits with connection to module130…149
Other kits related to AC connection150…199
• 200…299 = Kits related to DC connection, for example, busbars
Kits with connection to common DC200…229
Kits with connection to module230…249
Other kits related to DC connection250…299
• 300…399 = Kits related to module installation, for example, mechanical supports
Module supporting kits, basic mechanical support300…330
Shroud kits350…379
202 Ordering information
To Next Page
Loading...
