ABB ACS880-104

Cable entry kit
Cable entry kit, to be installed on the bottom plate of the enclosure, contains four 60 mm
diameter inlets for cables with grommets, wire meshing for 360° grounding, and a strain
relief bracket.
IllustrationKit codeOrdering codeQtyUsed with …
Ordering information 117
 AC-side components
Cable entry kit
Cable entry kit, to be installed on the bottom plate of the enclosure, contains four 60 mm
diameter inlets for cables with grommets, wire meshing for 360° grounding, and a strain
relief bracket. By default, one kit is needed for a D8D module.
Frame
size
Enclosure Qty Ordering code Kit code Illustration
D8D Rittal TS 8
1 kit for a
module
(default)
3AXD50000004385 A-468-8-441
Instruction code: 3AXD50000004817
Kit A-468-8-441.pd
f
A-468-8-4413AXD50000004385
1 (minimum) kit
for a module
All enclosure
types
Instruction code:
3AXD50000004817
￭ Mechanical installation accessories
These kits include parts that are used for installing the inverter module in the enclosure.
Inverter module top/bottom guides
This kit contains the rails that guide the inverter module at the top and the bottom.
IllustrationKit codeOrdering codeQtyUsed with …
A-4-8-310-VX3AXD500003370711
400 mm Rittal VX25
enclosure
Instruction code: 3AXD50000335152
258 Ordering information