￭ Frames R6i…R8i
The module is delivered on a wooden base, boxed in corrugated cardboard. The cardboard
box is tied to the base with PET bands.
1. Cut off the bands.
2. Lift off the cardboard box.
3. Remove any filling material.
4. Cut open the plastic wrapping of the module.
5. Lift off the module.
6. Check that there are no signs of damage.
Dispose of or recycle the packaging according to the local regulations.
Lifting the modules
Lift the unpacked module only by its lifting eyes.
Moving the modules
WARNING!
For general safety instructions for moving the module, see ACS880 multidrive
cabinets and modules safety instructions (3AUA0000102301 [English]).
44 Moving and unpacking the module
To Next Page
Loading...
