ABB ACS880-104

Ramp
The ramp can be used when installing or removing an R8i module.
Note:
Do not use the ramp with plinth heights over 100 mm. The ramp is designed for a plinth
height of 100 mm (the standard plinth height of Rittal VX25 enclosures).
IllustrationKit codeOrdering codeQtyUsed with …
A-468-8-304-VX3AXD500004380371All VX25 enclosures
Shrouding
This kit contains the shroud for the top part of the cubicle with the necessary brackets and
screws.
IllustrationKit codeOrdering codeQtyUsed with …
A-4-8-359-VX3AXD500003314841
400 mm Rittal
VX25 enclosure
Instruction code:
3AXD50000335169
A-6-8-360-VX3AXD500003373781
600 mm Rittal
VX25 enclosure
Instruction code:
3AXD50000335022
260 Ordering information