ABB ACS880-104

ContentsOrdering code
[Module type]
For example,
ACS880-104-008A0-3
• Inverter module (1) with ZCU control unit (1a)
• ZMU memory unit (2) with ACS880 primary control program. For availability
of other control programs, contact your local ABB representative.
• Module cover with control panel holder (3)
• ZDPI-01 panel interface board (4)
• Cable from ZDPI-01 to control unit (5)
• Control cable grounding/strain relief plate (6) with adapter (6a)
• Two power cable grounding/strain relief plates (7a, 7b)
• Module air temperature sensor (8) with mounting plate (8a)
• Cabinet cooling fan wire (connector with a stretch of wire).
[Module type] +0J414
For example,
ACS880-104-008A0-3 +0J414
• Inverter module (1) with ZCU control unit (1a)
• ZMU memory unit (2) with ACS880 primary control program. For availability
of other control programs, contact your local ABB representative.
• Control cable grounding/strain relief plate (6) with adapter (6a)
• Two power cable grounding/strain relief plates (7a, 7b)
• Module air temperature sensor (8) with mounting plate (8a)
• Cabinet cooling fan wire (connector with a stretch of wire).
[Module type] +N8010
For example,
ACS880-104-008A0-3 +N8010
ACS880-104-008A0-3
+0J414+N8010
• ACS880 primary control program with application programmability using
function blocks based on the IEC 61131-3 standard. For more information,
see Programming manual: Drive application programming (IEC 61131-3)
(3AUA0000127808 [English]).
For module types, see Ratings.
Ordering information 205