Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC083725-001Cable harness, base socket
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit on page 1087.
-Standard toolkit
Required consumables
NoteArticle numberConsumable
-Cable ties
Base cover, used for CRB 15000-
5/0.95.
3HAB3772-64O-ring
Shell Gadus S23HAC042536-001Grease
Removing the base cabling
Use these procedures to remove the base cabling.
Preparations before removing the cabling
NoteAction
Jog the robot to the specified position.1
xx2100000113
Valid for CRB 15000-5/0.95
• Axis 1: 0°
• Axis 2: 0°
• Axis 3: +85°
• Axis 4: 0°
• Axis 5: 0°
• Axis 6: 0°
Continues on next page
206 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.1 Replacing the base cabling
Continued
To Next Page
Loading...
