ABB CRB 15000 - Page 492

Removing the base cover
NoteAction
Valid for CRB 15000-5/0.95Remove the bottom cover by removing the attach-
ment screws.
1
xx2000002007
Valid for CRB 15000-10/1.52 and
CRB 15000-12/1.27
xx2300000760
Removing the brake release unit
NoteAction
xx2100000410
Cut the cable tie.1
Continues on next page
492 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.9 Replacing the brake release unit
Continued