ABB CRB 15000 - Page 517

NoteAction
Valid for CRB 15000-5/0.95Remove the guide pins and fasten the remaining
two screws.
5
Hex socket head cap flange screw:
M4x25 12.9 Lafre
2C2B/FC6.9+PrO-COat111 (16 pcs)
Valid for CRB 15000-10/1.52 and
CRB 15000-12/1.27
Hex socket head cap screw: M5x30
12.9 Lafre 2C2B/FC6.9, 16 pcs
xx2000001951
Tightening torque: 4.6 Nm (for CRB
15000-5/0.95) / 8.2 Nm (for CRB
15000-10/1.52 and CRB 15000-
12/1.27)
Torque tighten all screws crosswise.6
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (4 pcs).
Refit the cable bracket with four screws.7
Tightening torque: 0.8 Nm
xx2000001939
Continues on next page
Product manual - CRB 15000 517
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the lower arm
Continued