ABB CRB 15000 - Page 526

Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 15000 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Used for CRB 15000-5/0.95.
Also order new attachment
screws for the axis-3 joint unit:
3HAB3413-435 (12 pcs).
3HAC073949-001Housing
Used for CRB 15000-10/1.52 and
CRB 15000-12/1.27.
3HAC087550-001Housing
M4x35 12.9 Lafre
2C2B/FC6.9+PrO-COat111, with
NYPLAS glue , 12 pcs
Used for joint unit of CRB 15000-
5/0.95.
Always use new screws when re-
fitting a joint unit. If ordering a
new joint unit spare part, new
screws are included.
3HAB3413-435Flange socket head screw with
glue
For securing joint unit cable.3HAC075545-001Cable tie
Required tools and equipment
NoteArticle numberEquipment
For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95.
Attachment screws M4x35 (4 pcs)
are enclosed.
3HAC077788-001Lifting aid
For joint unit on axis 3 of CRB
15000-10/1.52 and CRB 15000-
12/1.27.
3HAC087788-001Lifting aid
Always use guide pins in pairs.
For joint units on axes 1, 2 and 3
of CRB 15000-5/0.95 and axis 3
of CRB 15000-10/1.52 and CRB
15000-12/1.27.
3HAC077786-001Guide pin, M4x120
Always use guide pins in pairs.3HAC077787-001Guide pin, M3x110
Content is defined in section
Standard toolkit on page 1087.
-Standard toolkit
Required consumables
NoteArticle numberConsumable
Isopropanol-Cleaning agent
Loctite 574-Flange sealant
-Cable ties
Continues on next page
526 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the housing
Continued