NoteAction
Lifting aid: 3HAC087787-001Fit the lifting aid to the joint unit, on the torque
sensor side.
CAUTION
The connectors and the joint unit cables are
sensitive to mechanical damage. Handle the as-
sembly with care.
2
Screws: M5x30 (4 pcs for plate and
2 pcs for beam)
xx2300000771
xx2300000772
xx2300000773
Place the two semicircular blocks surrounding the
joint unit, and use two fully threaded attachment
screws as removal tools to press the joint unit out
of position.
3
xx2300000774
Remove the joint unit from the swing.
CAUTION
The connectors and the joint unit cables are
sensitive to mechanical damage. Handle the as-
sembly with care.
4
Continues on next page
678 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the base
Continued
To Next Page
Loading...
