Connecting the cabling between the lower arm and swing
NoteAction
xx2000001938
Connect the connectors to each other and snap
them to the cable holders.
1
Cable ties (3 pcs)Secure the cabling with cable ties.2
xx2000001937
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (1 pcs).
Connect the functional earth cable with the screw.3
Tightening torque: 0.8 Nm
xx2000001936
Removing the lower arm covers (-10/1.52 and -12/1.27)
NoteAction
CAUTION
Make sure that all supplies for electrical power
are turned off.
1
Continues on next page
Product manual - CRB 15000 715
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the base
Continued
To Next Page
Loading...
