ABB CRB 15000 - Page 741

Securing the base (-10/1.52 and -12/1.27)
NoteAction
Attachment screws: M10x35 8.8 (4
pcs).
Lift the base to standing and secure it to the
foundation with the attachment screws and
washers.
1
Washers: 23/10.5/2.5 mm Steel (4 pcs).
Tightening torque: 32 Nm ±10%.
xxx
Removing the swing (-10/1.52 and -12/1.27)
NoteAction
xx2300000817
Valid for CRB 15000-10/1.52
Remove the swing transition.
1
xx2300000818
Valid for CRB 15000-10/1.52
Remove the swing flange.
2
Continues on next page
Product manual - CRB 15000 741
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.5.2 Replacing the swing
Continued