Removing the tubular cover
NoteAction
xx2000002123
Valid for CRB 15000-5/0.95
Remove the cover by removing the six screws.
Dispose the screws. New screws must be used
when refitting the cover.
New screws are included in the spare part delivery
of the joint unit.
1
xx2300000841
Valid for CRB 15000-10/1.52 and CRB 15000-
12/1.27
Remove the covers by removing the screws.
2
Separating the cabling between the tubular and the tilt
NoteAction
xx2000002086
Cut the cable ties on joint unit.1
Continues on next page
Product manual - CRB 15000 953
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.6.6 Replacing the axis-4 joint unit
Continued
To Next Page
Loading...
