Antenna connector
The Connected Services Gateway unit has either an Ability port or an antenna
connector on the front. See installation procedures in section On-site installation
on page 57.
xx1800000823
I/O connectors - Scalable I/O (option)
xx1700001063
Scalable I/O output connectorsA
Scalable I/O input connectorsB
The connectors contain 16 digital input signals, 16 digital output signals, 24 V and
0 V for the outputs, and 0 V for the inputs.
Note that the Digital Output requires a 24 V separate power supply.
For connection details, see Circuit diagram - OmniCore C30, Circuit
diagram - OmniCore C30 for IRB 14050, Circuit diagram - OmniCore C30 for CRB
15000, 3HAC059896-009, 3HAC063898-009, 3HAC072448-009 and Application
manual - Scalable I/O, 3HAC070208-001.
Continues on next page
120 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.5.8 Descriptions for connectors
Continued
To Next Page
Loading...
