This connector is internally connected with the optional power supply (DSQC3035).
The X45 is the 24 V power supply for the customer. The characteristics are shown
in the following table.
ValueParameter
24 V DCVoltage
-3% ~ +10%Voltage tolerance
8 AMax output current
Note
The 24 V power supply from the X45 is isolated from the controller internal logical
circuit.
The 24 V power supply from the X45 is neither monitored, or on/off controlled
by the controller. Residual voltage may remain shortly o X45 after turning-off the
controller.
For connection details, see Circuit diagram - OmniCore C30, Circuit
diagram - OmniCore C30 for IRB 14050, Circuit diagram - OmniCore C30 for CRB
15000, 3HAC059896-009, 3HAC063898-009, 3HAC072448-009.
Note
Connector Single-row female is delivered with the controller.
Product manual - OmniCore C30 125
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.5.8 Descriptions for connectors
Continued
To Next Page
Loading...
