Note/IllustrationAction
Screw: Screw with flange M3x6 (1 pcs)
xx1800003416
Secure the DeviceNet board with the
screw.
5
Screws: Torx, countersunk screw M4x10 (4
pcs)
xx1800003418
Refit the cover on the main computer and
secure the screws.
6
Installing the harness for DeviceNet
Note/IllustrationAction
xx1800001278
Remove the screws for the cover plate
on the front panel.
1
Continues on next page
180 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.5 Installing the fieldbus master and the DeviceNet harness
Continued
To Next Page
Loading...
