ABB OmniCore C30 - Page 199

Note/IllustrationAction
Connect the 24V power supply to the
cameras from the IP20 power outlet
connector or other power supply.
5
See Application manual - Integrated Vision.Connect wires to the inputs and output
connectors as required.
6
For more information about the option Integrated Vision, see Application
manual - Integrated Vision.
Product manual - OmniCore C30 199
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.8.3 Installing Integrated Vision
Continued