ABB OmniCore C30 - Page 240

Note/IllustrationAction
xx1800000477
Remove the fan bracket screws.2
xx1800000714
xx1800000478
Slide the fan bracket a little to the left and
remove it.
3
Refitting the standard fan
Refitting the standard fan
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Continues on next page
240 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.3.1.1 Replacing the standard fan
Continued