ABB OmniCore C30 - Page 279

Note/IllustrationAction
A
B B
B B
xx1800000532
xx1900000215
Screws, Torx pan head, M4x8 (1 pcs)A
Screws, Torx pan head, M4x8 (4 pcs)B
Fasten the assembly with the screws.
WARNING
Be careful with the cables installed below
the process plate.
4
Reconnect all the connectors on as-
sembly of the robot signal exchange
proxy, ethernet extension-seven port
switch (option), ABB ability™ connected
services, scalable I/O digital base (op-
tion), and main computer.
5
Continues on next page
Product manual - OmniCore C30 279
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.3.3 Replacing the main computer fan
Continued