Refitting the main computer assembly with process plate to the cabinet
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Location of wrist strap button:
xx1800000683
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
2
Note
Be careful with the frame of the controller
when refitting the unit.
Use the two guide pins to locate the as-
sembly onto the mounting plate.
3
Continues on next page
278 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.3.3 Replacing the main computer fan
Continued
To Next Page
Loading...
