ABB OmniCore C30 - Page 312

Note/IllustrationAction
Push the digital base into the bracket
until you hear a clear clicking sound.
5
xx1800000500
Connect the power cable connector:
• K5.1.X4 - K2.X3
6
Concluding procedure
Note/IllustrationAction
Refitting the controller covers on page 227.Refit the covers.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 212.
2
Replacing scalable I/O external units
To replace scalable I/O external units, see Application manual - Scalable I/O, and
Installing scalable I/O external devices on page 144.
312 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.7 Replacing the scalable I/O unit
Continued