Note/IllustrationAction
Push the digital base into the bracket
until you hear a clear clicking sound.
5
xx1800000500
Connect the power cable connector:
• K3.1.X4 - K2.X3
6
Concluding procedure
Note/IllustrationAction
Refitting the controller covers on page 227.Refit the covers.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 212.
2
Product manual - OmniCore C30 317
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.8 Replacing the safety digital base device
Continued
To Next Page
Loading...
