Note/IllustrationAction
1
xx1800000495
TOP VIEW
Carefully pull the side of the connected
services gateway and rotate it tightly to
take it out from the bracket.
Removing the main computer
Note/IllustrationAction
xx1900001194
Remove the screws holding the main
computer.
1
xx1900001190
Remove the two screws holding the pro-
cess plate.
Tip
Otherwise the main computer will have
a collision with the process plate.
2
Remove the main computer.3
Continues on next page
346 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.9 Replacing the main computer
Continued
To Next Page
Loading...
