ABB OmniCore C30 - Page 378

Note/IllustrationAction
Lengthened screwdriver
A
A B A
B A
xx1800000544
Screw (4 pcs)A
SnapsB
Remove the attachment screws and pull
the drive unit out from the two snaps.
4
xx1800000545
Refitting the drive unit
Refitting the drive unit
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Continues on next page
378 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.12 Replacing the drive unit
Continued