Info/illustrationAction
xx1800000458
Support foot unit, 2 pcsA
Torx countersunk screw M4x10 (4
pcs)
Tightening torque: 1.7-1.8 Nm
B
Install the support foot units.6
xx1800000462
Remove the five feet on the bottom.7
Torx countersunk screw M4x10 (5 pcs)
Tightening torque: 1.7-1.8 Nm
The antenna can be placed on top of the
controller.
Connect the antenna for Connected Services
Gateway (3G or WiFi).
8
Product manual - OmniCore C30 67
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.3 Mounting the controller with vertical mounting kit [3002-2]
Continued
To Next Page
Loading...
