ABB OmniCore C30 - Page 93

Included parts
The following parts are included in the delivery.
NoteRecommended supplierPart
TEConnector
EU3C x 1.5 mm
2
H05 VV-F BLACKCable
i
R/A Schuko 16A Right angle BLACK
UK3C x 1.5 mm
2
H05 VV-F ROUND BLACKCable
ii
Fully moulded BS1363 13A (5A fuse) Right angle BLACK
US3C x AWG16 SVT BLACKCable
ii
NEMA 5-15P 15A Straight BLACK
JP3C x 1.5 mm
2
sq HVCTF BLACKCable
ii
Japanese plug JIS C8303 12A Straight BLACK
CN3C x 1.5 mm
2
RVV BLACKCable
i
Chinese plug 3 pin 10A Straight BLACK
AU3C x 1.5 mm
2
VV-F BLACKCable
i
Australian plug 3 pin 10A Straight BLACK
AU3C x 1.5 mm
2
H05 BLACKCable
iii
i
This part is only optional for the IRB 14050, CRB 15000 and CRB 1100 controller. The cable length
is 3,000 mm.
ii
This part is only optional for the IRB 14050 controller. The cable length is 3,000 mm.
iii
This part is only optional for the IRB 14050, CRB 15000 and CRB 1100 controller. The cable length
is 5,000 mm.
The following label is attached on the cables.
xx2100000809
Procedure
Use the following procedure to fit the connectors.
Note/illustrationAction
Cut the cable to desired length.1
Continues on next page
Product manual - OmniCore C30 93
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.5.4 Fitting the connector
Continued