Note/illustrationAction
xx1900000056
Fit the distance sleeve on the insulation
inserts.
Tip
The installation is ok when you hear a
"click" sound.
15
Insert the housing to the connector.16
Tighten torque: 3.5Nm
xx1900000057
Tighten the connector with a 19 mm
open-ended wrench.
17
96 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.5.4 Fitting the connector
Continued
To Next Page
Loading...
