ABB OmniCore V250XT Type B - Installing the Ethernet Extension Switch

3.7.3 Installing the Ethernet extension switch
Location
The illustration shows the location of the Ethernet extension switch in the controller.
xx2300001820
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC10353HAC059187-001Ethernet Extension switch [3014-
1]
Harness A2.X4 - K4.X63HAC084152-001Ethernet Harness
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 426.
-Standard toolkit
Continues on next page
Product manual - OmniCore V250XT Type B 123
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.3 Installing the Ethernet extension switch