ABB OmniCore V250XT Type B - Replacing FlexPendant and Cable Components

5.4 Replacing parts on the FlexPendant
5.4.1 Replacing the power cable and power cable cover
Location
The illustration shows the location of the power cable, power cable gasket, and
power cable cover in the FlexPendant.
A
B
xx1800001154
Power cable coverA
Power cableB
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Harness-TPU3HAC071006-001Harness TPU connection
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 426.
-Standard toolkit
Continues on next page
322 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the power cable and power cable cover