ABB OmniCore V250XT Type B - Page 321

Note/IllustrationAction
xx1900001926
Insert the terminals (X1 & X2) of cables
into the lamp and secure with the screws.
4
Concluding procedure
Note/IllustrationAction
Closing the door on page 185.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
2
Product manual - OmniCore V250XT Type B 321
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.3.6 Replacing the LED indicator
Continued