ABB OmniCore V250XT Type B - Replacing the Fasten Strip

5.4.3 Replacing the fasten strip
Location
The illustration shows the location of the fasten strip on the FlexPendant.
xx1900000771
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC065419-001Fasten strip
Replacing the fasten strip
Note/IllustrationAction
Open the velcro on the fasten strip.1
Take the fasten strip out from the holes.2
Insert the new fasten strip into the holes
one by one.
3
Secure the velcro in a suitable length.4
Product manual - OmniCore V250XT Type B 329
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.4.3 Replacing the fasten strip