3.5 Electrical connections
3.5.1 Connectors on the OmniCore V250XT Type B controller
General
The following section describes the connectors on the OmniCore V250XT Type B
controller.
CAUTION
Always inspect the connector for dirt or damage before connecting it to the
controller. Clean or replace any damaged parts.
Continues on next page
Product manual - OmniCore V250XT Type B 69
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.5.1 Connectors on the OmniCore V250XT Type B controller
To Next Page
Loading...
