3.4.4 Connecting the Connected Services antenna
Connect the Connected Services antenna
Note/IllustrationAction
Note
The operating conditions must be such that
there is a minimum separation distance of
20 cm between the dedicated antenna and
nearby persons.
Place the magnet part of the antenna on
the outside of the cabinet.
1
xx2200001973
Insert the antenna cable through the
cable grommet.
2
Apply cable ties and suitable cable pro-
tection to ensure that the cable may not
be damaged by the door.
3
Continues on next page
Product manual - OmniCore V250XT Type B 67
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.4.4 Connecting the Connected Services antenna
To Next Page
Loading...
