ABB OmniCore V250XT Type B - Replacing the Scalable I;O Unit

5.2.6 Replacing the scalable I/O unit
Location
The illustration shows the location of the scalable I/O in the controller.
xx2300001818
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC10303HAC058663-001Local I/O Digital base [3032-1]
3HAC060919-001Connectors digital base/add on
DSQC10313HAC058664-001Digital add-on [3033-2]
DSQC10323HAC058665-001Analog add-on [3034-2]
3HAC060925-001Connectors I/O Analog
DSQC10333HAC058666-001Relay add-on [3035-2]
3HAC060926-001Connectors I/O Relay
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 426.
-Standard toolkit
-ESD protective wrist band
Continues on next page
Product manual - OmniCore V250XT Type B 225
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.6 Replacing the scalable I/O unit