ABB OmniCore V250XT Type B User Manual

1.1.2 Safety data
Prevailing standards and directives
For the use of industrial robots, regulations must be fulfilled as described in the
following standards and directives:
• EN ISO 10218-1:2011
• Machinery Directive 2006/42/EC
Performance level and category
EN ISO 10218-1 requires structure category 3 and performance level PL d on the
robot, see EN ISO 13849-1.
Risk assessment
The results of a risk assessment performed on the robot and its intended application
may determine that a safety-related control system performance other than that
stated in ISO 10218 is warranted for the application.
The SISTEMA/ABB FSDT libraries contains details for the safety functions.
Note
The safety functions are divided into two types called Basic Safety Functions
and Extended Safety Functions.
Performance level data
The performance level data for the respective controller variant is presented in
section Safety functions and safety related data for OmniCore V250XT Type B on
page 43.
14 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
1 Safety
1.1.2 Safety data

ABB OmniCore V250XT Type B Specifications

General

Brand	ABB
Model	OmniCore V250XT Type B
Category	Robotics
Language	English