ABB OmniCore V250XT Type B - Replacing Internal and External Fans

5.2.2 Replacing the fans
Location
The illustration shows the location of the fans in the controller.
xx2200001849
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
External fan3HAC082805-001Fan unit
Internal fan3HAC083027-001Fan unit
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 426.
-Standard toolkit
-ESD protective wrist band
Required documents
NoteArticle numberDocument
3HAC074000-008Circuit diagram - OmniCore
V250XT, rev 04 or later
Continues on next page
Product manual - OmniCore V250XT Type B 189
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.2 Replacing the fans