3.6 I/O system
3.6.1 Available industrial networks
General
Note
Two industrial network masters can be run in parallel on the OmniCore controller.
It is the responsibility of the integrator to verify the behavior when two masters
are used in one OmniCore.
Fieldbus connections
There is a slot available for installing a DeviceNet M/S board on the main computer.
The software based fieldbuses are connected directly to one of the Ethernet ports.
xx2300001738
Available board
The following master board is available.
Type designationArticle numberDescription
DSQC10963HAC085254-001DeviceNet M/S
Continues on next page
114 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.6.1 Available industrial networks
To Next Page
Loading...
