ABB OmniCore V250XT Type B - Replacing the Measurement Unit

5.5.2 Replacing the measurement unit
Location
The illustration shows the location of the measurement unit in the motor connection
box.
xx2300001700
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC633C3HAC043904-001Measurement Unit
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 426.
-Standard toolkit
-ESD protective wrist band
Continues on next page
332 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.5.2 Replacing the measurement unit