ABB OmniCore V250XT Type B - Page 331

Refitting the motor connection box
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
Reconnect any connectors disconnected
at removal.
2
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 173.
3
Product manual - OmniCore V250XT Type B 331
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the motor connection box
Continued