5.2.18 Replacing the break resistor bleeder
Location
The illustration shows the location of the break resistor bleeder in the controller.
xx2200001072
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
Continues on next page
284 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.18 Replacing the break resistor bleeder
To Next Page
Loading...
