ABB OmniCore V250XT Type B - Replacing the Internal Fan

5.2.2.2 Replacing the internal fan
Location
The illustration shows the location of the internal fan in the controller.
xx2300001834
Removing the internal fan
Preparations
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
Opening the door on page 184.Open the door.2
Continues on next page
194 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.2.2 Replacing the internal fan