ABB OmniCore V250XT Type B - Page 195

Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
3
xx2200001817
Note/IllustrationAction
Disconnect all connectors from the unit
to be replaced.
1
xx2200001069
Remove the screws holding the fan as-
sembly.
2
Remove the fan assembly from the
mounting plate.
3
xx2200001070
Remove the screws holding the fan cov-
er.
4
Remove any cable ties.5
Continues on next page
Product manual - OmniCore V250XT Type B 195
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.2.2 Replacing the internal fan
Continued