Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Option 3005-1 Moist particle filter3HAC082548-001Air filter coarse assembly
Option 3005-2 Moist dust filter3HAC082547-001Air filter fine assembly
Option 3005-2 Moist dust filter3HAC084607-001Air filter, fine (Polymeric)
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 426.
-Standard toolkit
-ESD protective wrist band
Required documents
NoteArticle numberDocument
3HAC074000-008Circuit diagram - OmniCore
V250XT, rev 04 or later
Installing the air filter
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
xx2200001827
For option 3005-2 Moist dust filter:
Insert the polymeric filter element to the
filter and secure with the metallic line.
2
Continues on next page
Product manual - OmniCore V250XT Type B 147
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.8 Installing the air filter
Continued
To Next Page
Loading...
